Clear jet CX-one Manual do Utilizador descarregar pdf (Página 18)

CLEARjet GmbH CX-one

Disable erase roller heating permanent <ESC>%L[n]

Description

Use this command to activate or deactivate the eraser-

roller heating permanent. In deactivated state the erase-

roller heating is stopped and no heat-up will be done.

Use parameter 1 to reactivate erase-roller heating.

Parameter is stored to EEPROM.

[n]=0: disable eraser roller heating permanent

[n]=1: enable eraser roller heating (default)

Note:

When reactivating erase-roller heating perform a printer

reset after using the command!

The erase-roller needs several minutes to cool down!

Power down or a printer reset within 5 sec. after using this

command may cause unpredictable results.

ASCII – Code

<ESC>%L[n]

HEX – Code

1B 25 4C [n]

Example

<ESC>%L0

diable erase-roller heating permanent

Paperticket mode <ESC>P

Description

Print paper ticket ( No erase operation )

This mode is active only for the following card!

ASCII – Code

<ESC>P

HEX – Code

1B 50

Programmers Manual Page 18 / 53

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

Sem comentários

Clear jet CX-one Manual do Utilizador Página 18