Clear jet CX-one Manual do Utilizador descarregar pdf (Página 17)

CLEARjet GmbH CX-one

Set printer resolution <ESC>i[c]

Description

This command sets the resolution of your printer

in y-direction.

[c]=0 200 dpi

[c]=1 300 dpi (default)

[c]=2 not in use

[c]=3 not in use

[c]=4 600 dpi

Note: All settings other than [c]=1 (300 dpi) are active for

one card only. For the next card the printer automatically

returns to the default of 300 dpi.

The resolution in x-direction is 200 or 300dpi, depending

on the printhead actually used.

ASCII – Code

<ESC>i[c]

HEX – Code

1B 69 [c]

Example

<ESC> i4 set resolution 600 dpi in y-direction

Disable eraser roller heating <ESC>Q[n]

Description

Use this command to activate or deactivate the eraser-

roller heating. In deactivated state the erase-roller heating

is stopped.

Use parameter 1 to reactivate erase-roller heating.

[n]=0: disable eraser roller heating

[n]=1: enable eraser roller heating (default)

Note:

The erase-roller needs several minutes to cool down!

Set parameter is active until next reset or power on/off

ASCII – Code

<ESC>Q[n]

HEX – Code

1B 51 [n]

Example

<ESC>Q0

disable erase-roller heating

Programmers Manual Page 17 / 53

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 52 53

Sem comentários

Clear jet CX-one Manual do Utilizador Página 17